Inspection of the tree prior to cabling is essential. Firstly, will determine if the tree has faults or damage that are too severe to be remedied.

Secondly, after the tree has been properly inspected and the branches have been determined to be both large enough and strong enough to qualify for a cabling system, it is advised to correctly prune the tree first.

Thirdly, prior to installing a dynamic cable system, we properly prune trees. This will allow the wind to flow through the canopy and will help minimize the amount of snow that will be able to accumulate on the tree.

 

These systems are often referred to as non-invasive cable systems.They require no drilling into the trees and they adhere to strength standards set in the United States.

Cobra, Tree Guard and Branch Saver are extremely strong, synthetic ropes. They are attached to broad, non abrasive bands. These ranging from 2 – 12 tons. These bands or straps wrap around the tree’s limbs being supported. This type of cabling system allows the tree to maintain it’s natural movement. A healthy tree that continues to move will create reactive, support wood. Consequently, will have the ability to grow stronger.

There are also some dynamic cabling systems that use traditional hardware. For example, through-bolts and lag hooks, which attach the synthetic “cables” to the limbs.

If you would like to know if your tree qualifies for a Dynamic Cable System, please contact us.